Get a quote
TL-10

Waterproofing Calculator: Torch-On Rolls or Litres of Liquid

Enter the size of your flat roof or balcony and the height of the upstands. Choose torch-on or liquid waterproofing and get the rolls, litres, fabric and primer to plan for.

A worker torching a bitumen membrane onto a flat concrete roof of a South African house
A worker torching a bitumen membrane onto a flat concrete roof of a South African house

Flat Roof Waterproofing Calculator

Change any measurement and the answer updates as you type.

Measuring sheetTL-10
Turn up at least 150 mm
0–4 sides of the rectangle
From the product's data sheet

Torch-on rolls6 × 10 m² rolls

Flat area
40.00 m²
Upstands
26.0 m long
Total area to cover
43.90 m²
Allowed for 100 mm side and 150 mm end laps
15%
Bitumen primer (about 0.25 L/m²)
11.0 L
  • Fix ponding first: a flat roof needs a fall of at least 1 in 70 to its outlets, or the new waterproofing fails early where water stands.
  • Apply in dry weather with no rain forecast for at least 24 hours, and only on a clean, dry surface.
Estimates only: confirm quantities with your supplier or contractorTL-10

Waterproofing a flat roof or balcony means covering the flat area and turning the membrane up the walls. This waterproofing calculator adds the upstands to the flat area, then works out torch-on rolls with an allowance for laps, or litres of liquid for the coats you choose. These are estimates, so use the coverage rate on your product's data sheet.

How the waterproofing calculation works

The flat area is length times width. Each edge that has an upstand adds its length times the upstand height. The default height is 150 mm, which is the minimum turn-up. The total is the area to cover.

  • Torch-on: total area plus 15% for 100 mm side laps and 150 mm end laps, divided by 10 m² per roll. Primer is about 0.25 litres per square metre.
  • Liquid: total area times the number of coats times the litres per square metre per coat. The default is 3 coats at 0.75 litres.
  • Fabric: reinforcing fabric with a 10% overlap, plus the number of 20 L tubs.

How to measure and prepare

Measure the roof or balcony from wall to wall. Count how many of the four sides meet a wall or parapet, and enter that number in the edges field. Add the upstand height, usually at least 150 mm.

Fix ponding first. A flat roof needs a fall of at least 1 in 70 towards its outlets, or the new waterproofing fails early where water stands. The surface must be clean, sound and dry.

Practical tips for South Africa

Apply waterproofing in dry weather, with no rain forecast for at least 24 hours. On the Highveld and other summer-rainfall areas, the dry winter months are best, before the October storms. In the Western Cape, work in summer. Hot roofs can also be hard on liquid products, so follow the data sheet.

Coastal damp and salt are harder on exposed edges, so pay extra attention to flashings and drains. Check the roof after each big storm in the first season.

When to call a pro

Torch-on work uses an open flame on a roof, so it is a job for trained applicators. A pro should also handle recurring leaks, damaged screed, cracked slabs and complicated details around pipes and outlets.

HandymanService.co.za does not apply waterproofing or sell materials. Use the form on this page to get a free quote from independent waterproofing contractors and suppliers.

Frequently asked questions

How many torch-on rolls do I need?
Work out the flat area plus the upstands, add 15% for laps, and divide by 10 m², the size of a standard roll. Round up. The calculator also shows the bitumen primer at about 0.25 litres per square metre.
How much liquid waterproofing do I need?
Multiply the total area by the number of coats and the litres per square metre per coat from the data sheet. The default is 3 coats at 0.75 litres. The calculator also shows reinforcing fabric and the number of 20 L tubs.
How high should the upstand be?
Turn the membrane up the wall by at least 150 mm, which is the default. Higher upstands add area, so the calculator includes them for every edge that meets a wall or parapet. Check the product's data sheet for its own requirement.
When is the best time to waterproof a roof?
Choose dry weather with no rain forecast for at least 24 hours, on a clean, dry surface. In summer-rainfall areas that usually means winter, and in the Western Cape it means summer. Storm and hail season make delays likely.

More calculators and guides

Get a free quote

Tell us the job and where it is. A handyman, contractor or supplier who works in your area quotes you directly.

Job cardNo. 00882
  1. 1Tick the jobs and describe the work.
  2. 2We pass it to someone who works near you.
  3. 3They quote you. Free, no obligation.
Tick what needs doing (optional)

Free and no obligation. By sending you agree that we may share your request with a suitable handyman, contractor or supplier. See our privacy policy.

Get a free quote